Skip to main content

Automatic Farm Gate Opener

Single Swing
Farm Gate Opener

E8 Single solar farm gate automation, solar gate, solar farm gate, solar gate opener
Solar - E8 500kit $850
Electric - E8 500kit $700
** Suits gates up to 4.2mtr 

Double Swing
Farm Gate Opener

E8 Double solar automatic farm gate opener, solar powered gates, gates powered solar, gates solar
Solar - E8 500kit $1100
Electric - E8 500kit $950
** Suits gates up to 4.2mtr 
Kit Pricing
"If your gate is over the recommended 4.2mtr length for the E8 system, check out our
TMT kit which is suited to much heavier gates and gates up to 5.0mtrs in length."

Solar Farm Gate Openers
Available in Single and Double kits 

Solar Farm Gate Kit Inclusions

  • Actuator arm/s

  • Control box

  • Control board

  • 2 remotes

  • Brackets and gate stop

  • 2 x Release keys

  • Caution sign

  • 45watt solar panel with mounting bracket & 10mtrs cable

  • Solar Regulator & 12v 14ah deep cycle battery

e8 actuator arm
Actuator
e8 control box
Control Box
ega control board
Control Board
e8 swing remotes
Remotes
e8 swing brackets
Brackets
e8 gate stop
Gate Stop
e8 release keys
Release Key
caution gate opener sign
Caution Sign
solar powered battery
12ah battery
e8 solar panel
Solar panel
e8 solar regulator
Solar Regulator

Electric Farm Gate Kit Inclusions

  • Actuator arm/s

  • Control box

  • Control board

  • 2 remotes

  • Brackets and gate stop

  • 2 x Release keys

  • Caution sign

  • Outdoor Transformer (low voltage cable not supplied)

e8 actuator arm
Actuator
e8 control box
Control Box
e8 control board
Control Board
e8 swing remotes
Remotes & Receiver
e8 gate opener brackets
Brackets
e8 gate stop
Gate Stop
e8 release key
Release Key
gate opener caution sign
Caution Sign
e8 transformer
Transformer
Kit Inclusions
Automatic gate solutions for farm gates can improve efficiency,
increase security, and make farm management easier and more effective
Do you require an automatic gate solution for your farm gate?

Automating farm gates can be a challenging task, as these gates are typically wide, lightweight, and flexible. However, with the help of BMGi's innovative solar-powered gate opener kits, farm owners can now enjoy the convenience and security of automated gates that can withstand the tough Australian conditions.

BMGi's team of experts has put years of knowledge and careful consideration into designing and manufacturing these kits. Our aim was to provide a reliable and secure solution that can endure the harsh Australian climate. One of the key features of these kits is the use of a weatherproof case, which protects the internal components from rain, dust, and other environmental factors.

The gate opener kits are powered by a 12V 14Ah deep cycle battery, which is charged by a high-power 45W solar panel. The solar panel is connected to a Pulse-Width Modulation (PWM) solar controller, which ensures that the battery is charged efficiently and effectively. According to our testing, a fully charged 14Ah battery can support approximately 200 cycles over a 21-day period.

The gate opener kits are designed to work seamlessly with farm gates of up to 14ft or 4.2mtrs. From the mounting brackets to the motor, every component is carefully crafted to ensure optimal performance and durability. Furthermore, the kits are supplied in a DIY form, which means that almost any properly hung swing gate can be automated using these kits.

Thousands of these solar-powered gate opener kits have already been installed across Australia, and they have proven to be highly effective and reliable. With BMGi's gate opener kits, farm owners can now enjoy the convenience and security of automated gates without having to worry about maintenance or running costs.

In conclusion, BMGi's solar-powered gate opener kits are a game-changer for farm owners who are looking to automate their gates. These kits are designed to withstand the tough Australian conditions and provide reliable and secure gate automation. With easy DIY installation and thousands of successful installations across the country, BMGi's gate opener kits are a trusted and proven solution for automated farm gates.

farm gate opener, farm gate, farm gate solar
Farm Gate Automation, swing gate solar, farm swing gate, solar farm gate
automatic solar gate, automatic solar farm gate, double swing farm gate
Farm Gate Automation
Farm Gate Automation
Stainless Durability

Among the most attractive properties of this solar farm gate opener is its high grade 439 stainless steel casing for its durability and resistance to corrosion, allowing it to withstand the wear and tear of everyday usage.

solar and electric farm gate opener
Solar or Mains - Energy Efficient

Our farm gate openers are available in both solar and electric options. The solar kit for your farm gate is the perfect solution if you don't have access to mains power or you want to be energy efficient.

However our electric kit is low voltage which means you can have power up to 50mtrs away, allowing you to run low voltage cable yourself legally without employing an electrician.

With class leading efficiency, our solar farm gate openers are truely designed for solar applications. With standby capability up to 28 days you can rest assure that the E8 system will continue to operate during prolonged overcast weather conditions.

Solar panel for farm gate automation
45 watt Solar Panel

The E8 farm gate opener comes with our 45 watt solar panel to provide you with a higher rate of charge for your 12v 14ah battery.  Also with our solar panel is a mounting bracket for easy installation and 10mtrs of cable.

Also supplied in our kits is a PWM solar controller.   These controllers operate at a relatively constant harvesting efficiency regardless of the size of the solar panel.  The PWM controller works by reducing the amount of power going into your battery as it approaches capacity. When your battery is full, PWM controllers maintain a state of “trickle”, which means they supply a tiny amount of power constantly to keep the battery topped up.

no maintenance farm gate opener
Zero Maintenance

The farm gate's stainless steel actuator arm is a maintenance free system which provides a user friendly experience.  Providing your gate is well hinged, level and plumb with the post then you will have a stress free operation of your gate.

round post brackets for farm gate opener
Optional Round Post Brackets $35/pr

Most rural farm gates are hinged from a round post.  We have designed round post brackets as an option when purchasing our kits. 

The standard bracket supplied in the kit is a flat 100mm x 90mm bracket which can still be used on round posts by chiseling out a small section for the standard bracket to attach too. 

However, if your post is around the 150mm in diameter or smaller then you may prefer the option of these round post brackets. This way you don't run the risk of weaking your post by chiseling into it or you may prefer less messing around when doing the install.

Round gate bracket for farm gate automation
Optional Round Gate Bracket $35 ea

We have had a round gate bracket fabricated to suit Australia's rural farm gates.  This gate bracket acts like a clamp around your farm gate tubing which provides a flat surface for the standard gate bracket supplied in the kit to attach too. 

Using this round gate bracket allows easy adjustment when first setting up your kit and also doesn't require drilling through your gate unlike the standard gate bracket requires.

push open bracket farm gate opener
Push to Open Bracket $25 ea

Does your farm gate push out towards the road?  No problem!
Using our 'push to open bracket' you can have the actuator arm positioned on the inside of the property which then allows the arm to push your gate outwards. 

Take note that your actuator arm will take up approximately 200mm into the driveway area (as shown in image opposite) when the gate is in the full open position.

If you cannot afford to lose 200mm of your opening then you can mount the actuator arm on the outside of the gate, now pulling the gate open you will not require the 'push to open bracket'.

Features
Optional Extras
e8 round gate bracket
E8 Round Gate Bracket $35 ea

Do you have a rural farm gate with the round tube frame? If so you may be interested in adding the round gate bracket to your kit.

e8 round post bracket
Round Post Bracket $35 ea

Is your gate swinging from a round post?  You may be interested in the round post bracket option (standard flat bracket 100mm x 90mm). 

e8 push to open bracket
E8 Push to open bracket $25 ea

Suited for a push to open gate having the actuator arm on the inside of the property pushing the gate/s out to the road to open.

3G/4G GSM Gate Opener
3G/4G GSM Gate Opener $300

Operate your gate from anywhere in world. Give friends and family access to your gate via the easy to use App.

bmgi digital keypad
Keypad - Digital $150 ea

This digital touch keypad provides security to your property with a 4 digit pin code for visitors - 12volt - wires direct to your gate opener control board.

bmgi wireless keypad
Keypad - Wireless $150 ea

Provides security to your property with a 4 digit pin code for visitors - 12/24volt - Keypad requires 4xAA batteries (not included) compatible with the EGA control board.

visitor push button
Push Button - $35 ea

Wires into the main control board and placed at the gate to allow visitors in and out of the property.

visitor push button
Push Button (Wired) - $35 ea

Wires into the main control board and placed at the gate to allow visitors in and out of the property.  The key allows you to disable and lock the push button from being used.

bmgi long range receiver
Long Range Receiver $90

Need distance on your gate opener? Maximum distance 400mtrs (dependant on area and line of sight)

Videos of the E8 gate opener in action
An example of a push to open setup using the E8 swing opener.
Automatic Gate Solutions!
Customers showing us their
installation photos on their farm gates
The E8 Farm Gate Opener
Check them out below
Farm gate opener

Installation using the round gate bracket with the standard post bracket.  This is a pull to open setup with the actuator on the inside of the property, pulling the gate into open.

Solar Farm gate opener

Installation using the standard gate bracket and drilling straight through their gate frame along with the standard post bracket.  This is a pull to open setup with the actuator on the inside of the property, pulling the gate into open.

Electric Farm gate opener

Installation using the standard gate bracket and also added a vertical upright to their gate to attached the bracket too.  This is a pull to open setup with the actuator on the inside of the property, pulling the gate into open. They have also used the gate stop supplied in the kit as a ground stop when the gate is fully closed.

Automatic Farm gate opener

Installation using the standard gate bracket and drilling straight through their gate frame along with the standard post bracket.  This is a pull to open setup with the actuator on the inside of the property, pulling the gate into open.  Actuator is set to full retraction with the gate in the open position to prevent having to use a gate stop.

Solar panel Farm gate opener

Best positioning for your solar panel is North facing and our installation manuals will advise the perfect degree depending on the area and state you're located in.

Auto Farm gate opener

Customer has prepared for a push to open setup.  Using the round gate bracket for easy installation and adjustment, the standard post bracket and the push to open bracket also. The view of this image has the gate in the closed position.  The photo to the right is showing the finised setup with the gate opened.

Farm gate solar opener

Installation is showing another a push to open setup using the push to open bracket.  As you can see this bracket is providing a really good angle between the gate and arm that is required. Without the push to open bracket your actuator arm will run parallel with the gate causing all sorts of issues.

Auto Farm Gate

Installation using the round gate bracket with the standard post bracket.  This is a pull to open setup with the actuator on the inside of the property, pulling the gate into open.

Solar gate opener

Installation using the round gate bracket and round post brackets to accomodate their round post.  This is a pull to open setup with the actuator on the inside of the property, pulling the gate into open.

Solar power farm gate

Installation using the round gate bracket and round post brackets to accomodate their round post.  This is a pull to open setup with the actuator on the inside of the property, pulling the gate into open. They have added a horizontal mid rail to attach the actuator arm to and also installed our electric gate lock for extra security.

Farm gate automation

Installation using the standard gate bracket and drilling straight through their gate frame along with the standard post bracket.  This is a pull to open setup with the actuator on the inside of the property, pulling the gate into open.  Actuator is set to full retraction with the gate in the open position to prevent having to use a gate stop.

Auto Farm gate opener

Customer has fabricated their own mounting post to accomodate
our 45watt solar panel as well as mounting the
main control box to it.

Automatic Farm gate

The final installation shown here from the left photo setup shows the actuator arm setup for a push to open install, with the gate in the full open position and still providing that important angle that is required between the gate and actuator arm.

Farm Gate Opener Install Photos