Skip to main content

Single gate setup - changing from MTA to MTB

If you have a single gate setup and you are concerned that MTA on the control board has failed, you can change the arm over to MTB.

Before doing this you should have determined that the arm is in good condition and works directly off a 12volt battery. You have checked the arm cable over and can visibly see no kinks or breaks.

If you have a gate lock setup, this option will not work for you. You can try disconnecting the gate lock and run this test, however you won't be able to set the gate lock back up if you decide to run the gate from MTB for now.

If you require futher assitance after this video, please call our office on 07 3205 3002 and press 1 for sales or 2 for further assistance.