A fully featured kit ready for do-it-yourself installation
TMT 800LS Heavy Duty Sliding Gate Motor
The TMT 800LS is a heavy duty sliding gate opener suitable for both residential and semi commercial gates up to 800kgs.
Designed for the tough Aussie conditions with soft start/finish and fast travel speed.
There are 2 options for this setup. Option 1 is supplied with an outdoor transformer that allows the DIY installer to position the Plug-in step-down transformer (240 volt to 24 volt) up to 30mtrs away from the opener using 2 core cable (not included)...much like installing 12 volt garden lighting....quick and easy. Option 2 using the internal transformer which allows for an electrican to hardwire power direct to the unit or plug directly in to a power point at the gate.
Features
Swift: specially designed gear ratio for class leading operation speeds of 16mtr/min
Durable: Multi-layered coating that provides holistic protection against atmospheric agents and UV radiation
Light: Die cast aluminum base that balances performance with durability, offering best in weight to performance ratio
Delicate: Optional deceleration at closing for a soft touch
Sensitive: Obstacle detection to ensure that accidental entrapments do not cause harm to your property or loved ones
Adjustable: Over 20 customizable settings from gate operation speed, limit locations, soft closing and more
User-Friendly: Alphanumeric LED on control board for status indication and settings
Safe: Built in limit switches to ensure safe operation
Features
Specifications
Battery Backup
Yes (optional)
Max. Run Speed
16mtrs/min
Max. Gate Mass
800kgs - level ground
Max. Gate Size
8mtrs
Gear Type
Worm Gear
External Pinion Gear
Steel
Internal Drive Gear
Polyoxymethylene
Power Supply
24Vdc
Nominal Thrust
7000N
Peak Thrust
7500N
Motor RPM
3600RPM
Motor Power
144 Watts
Nominal Input Power
6A
Collision Sensing
Yes
On Board Receiver
Yes
Remote Qty.
100
Adjustable Ramp down
Yes
Auto Close times
180sec
MANUAL OVERRIDE
When power has failed or you need to manually slide the gate open.
Insert Key
Turn key clockwise to unlock device
Pull the release bar open and slide gate
MOTOR OVERVIEW
MOTOR BASE PLATE
A = 315mm
B = 180mm
C = 260mm
D = 115mm
E = 60mm
F = 80mm
G = 40 x 35
H = 50 x 50
A = Conduit holes
B = Base plate mounting holes
C = Motor mounting holes