Skip to main content
Christmas Closure Dates - 18.12.2026 (@ 3pm) - Re open 12.01.2027 (@ 9am) Any orders placed over this period will be shipped out the week of the 11th January 2026

Written by Super User on . Posted in Uncategorised.

E8 swing Gate Opener

SWING GATE AUTOMATION

E8 Solar & Electric Swing Gate Opener Kits

Reliable, DIY-friendly gate automation for homes, farms and rural properties across Australia. Built for Australian conditions, with minimal maintenance and no need for heavy-duty commercial operators.
From $735 – $1,254
STEP 1.

Solar vs electric — which is right for you?

The E8 comes in both versions, so you can match it to your power situation rather than your gate type. Both kits use the same actuator and control system — the only difference is how it's powered.

Solar

Best for
  • Farms and acreage properties
  • Rural driveways and remote entrances
  • Areas without access to 240V power
Why choose it
  • No trenching or electrical work required
  • Lower installation cost
  • Environmentally friendly

Electric

Best for
  • Suburban homes
  • Driveway entrances near mains power
  • High-use gates opened several times a day
Why choose it
  • Consistent power supply, no reliance on sunlight
  • Ideal for frequent daily use
  • Simple setup if 240V is already nearby
STEP 2.

Kits & pricing

Choose single (one gate leaf) or double (two leaves), then your power type. Every kit includes the actuator, control system, remotes and mounting hardware.
Single Gate - Solar kit

$890 BUY NOW

E8 Single solar kit

Kit Inclusions

  • 1 x Actuator arm
  • Control box
  • Control board
  • 2 x remotes
  • Brackets and gate stop
  • 2 x Release keys
  • Warning sign
  • 45watt solar panel with mounting bracket & 10mtrs cable
  • Solar Regulator
  • 12v 14ah deep cycle battery
Single Gate - Electric kit

$735 BUY NOW

E8 Single electric kit

Kit Inclusions

  • 1 x Actuator arm
  • Control box
  • Control board
  • 2 x remotes
  • Brackets and gate stop
  • 2 x Release keys
  • Warning sign
  • Outdoor Transformer with 2mtrs cable
Double Gate - Solar kit

$1155 BUY NOW

E8 Double solar kit

Kit Inclusions

  • 2 x Actuator arms
  • Control box
  • Control board
  • 2 x remotes
  • Brackets and gate stop
  • 2 x Release keys
  • Warning sign
  • 45watt solar panel with mounting bracket & 10mtrs cable
  • Solar Regulator
  • 12v 14ah deep cycle battery
Double Gate - Electric kit

$1000 BUY NOW

E8 Double electric kit

Kit Inclusions

  • 2 x Actuator arms
  • Control box
  • Control board
  • 2 x remotes
  • Brackets and gate stop
  • 2 x Release keys
  • Warning sign
  • Outdoor Transformer with 2mtrs cable
Unpacking the Electric E8 500 kit
Unpacking the Solar E8 500 kit
BUILT FOR THE JOB

E8 Gate Opener Features

The E8 balances simplicity with performance — everything you need for dependable gate automation, nothing you don't.
  • Compatible with single or dual swing gates
  • Remote control access included
  • Adjustable opening and closing speeds
  • Soft start and stop functionality
  • Safety stop/reverse on obstruction
  • Grade 439 stainless steel construction
  • Auto-close up to 99 seconds
  • Secure manual release by Allen key
BEFORE YOU BUY

Specifications & Gate Compatibility

Confirm your gate matches these limits before ordering.
Max gate length 4m per leaf
Max gate weight 250kgs per leaf @ 1.5mtrs
Gate type Light - wind Friendly - not enclosed - Farm style
Power options Solar or low voltage electric
Gear type Screw drive
Max output power 80watts per motor
This system suits light to medium-duty gates. It may not be the right fit if your gate is fully solid (high wind resistance), exceeds 15% enclosed surface area, exceeds the weight or length limits above, or needs high-frequency commercial use.
OPTIONAL ADD ONS

Build out your kit

Most customers order the base kit alone — these are here if your gate or property needs something extra.
  • round gate bracket

    Round Gate Bracket $35/ea

    For round tube farm gates frames.

    View more

  • round post bracket

    Round Post Brackets $35/ea

    For gates swinging from a round post.

    View more

  • push out bracket

    Outward Opening Bracket $25/ea

    For push-to-open gates with the arm inside the property.

    View more

  • remote

    Extra Remote $40/ea

    Additional handheld remote.

    View more

  • keypad

    Wireless Keypad $165/ea

    Visitor access by pin number.

    View more

  • wireless push button

    Wireless Button $75/ea

    Visitor access by push button.

    View more

  • button

    Hard Wired Button $35/ea

    Wired visitor push button.

    View more

  • long range receiver

    Long Range Receiver $90/ea

    Extends remote distance.

    View more

  • long range remote

    Long Range Remote $60/ea

    Open the gate from inside the house.

    View more

  • antenna booster

    Antenna Booster $45/ea

    Boosts distance on standard remotes.

    View more

  • electric gate lock

    Electric Gate Lock $165/ea

    Extra gate security.

    View more

  • gsm gate opener

    4G GSM Gate Opener $240ea

    Operates the gate via mobile phone.

    View more

COMMON QUESTIONS
Frequently asked questions
Will this system work if my gate swings outward?

Yes. The E8 can be set up for an inward or outward swinging gate, and you can still have the actuator arm on the inside of the property. If that's your preferred setup, order the E8 outward opening bracket.

How many times a day can a solar gate opener run?

Typical residential use (around 10 cycles a day) is easily supported by sunlight and battery capacity.

Will the solar still work in cloudy weather?

Yes. Energy is stored in the battery, so the gate keeps operating through low-sunlight periods.

Can I install the E8 myself?

Yes. It's built for DIY installation and comes with instructions & basic handyman skills are usually enough.

What maintenance does it need?

Very little. Just check moving parts, battery condition (solar kits), and gate alignment from time to time.

Can I add accessories later?

Yes. The system works with keypads, sensors, and remote access modules added any time after install.

More FAQS

WHY BUY FROM BMGI

Support and reliability matter just as much as the product

Expert advice before purchase
Ongoing technical support
Reliable, tested
products
Fast Australia-wide shipping

Ready to automate your gate?

Whether it's a solar gate opener for a farm or a simple electric system for your driveway, the E8 delivers reliable performance without the complexity or cost of heavy-duty alternatives.

Shop E8 kits

Read more: E8 swing Gate Opener

  • Hits: 195433

Written by Super User on . Posted in Uncategorised.

sliding gates

🇦🇺 Australian Owned & Operated - DIY Installation - 2 Year Warranty - Ships Nationally
SLIDING GATE MOTORS & OPENERS

FIND THE RIGHT SLIDING GATE MOTOR
FOR YOUR PROPERTY

Large rural driveway, suburban block, or no power at the gate — BMGi has an electric or solar sliding gate motor built for Australian conditions, with a kit you can install yourself.
  • DIY-friendly installation
  • Solar & electric options available
  • Phone Support
  • Light to heavy gates (up to 800kg)
  • Fast dispatch Australia-wide
SHOP BY MODEL
Pricing from $770–$1,079 depending on requirements
FIND YOUR MOTOR

MATCH YOUR GATE TO A MOTOR

Check your gate weight, power access, and usage against the table below — that's the only decision that matters.
MODEL POWER MAX GATE WEIGHT BEST FOR
Ultima ACDC 800 Electric — powerpoint required at gate Up to 800kg Heavy-duty, high-use residential & light commercial
Ultima ACDC 500 Electric — powerpoint required at gate Up to 500kg Heavy-duty, high-use residential & light commercial
Ultima HT18 Solar or DC electric — no power needed, or powerpoint up to 50m away Up to 600kg Standard residential, rural & off-grid
Ultima RT25 Solar or DC electric — no power needed, or powerpoint up to 50m away Up to 500kg Standard residential, rural & off-grid
TMT 800LS 24VDC electric — powerpoint at gate or up to 30m away Up to 800kg Standard residential & high-traffic entrances
Tip: always choose a motor rated above your actual gate weight for best long-term performance. No power within range? Go solar — it's just as reliable and avoids trenching. See the full in-depth comparison →
OUR RANGE

TWO SYSTEMS - EVERY GATE COVERED

DACE ULTIMA GATE OPENER

DACE Ultima Range — RT25, HT18 & AC/DC

Up to 800kg · Solar, low-voltage or powerpoint

The most flexible option in our range — pick the power source that suits your site, then size to your gate weight. Fast opening speed, DIY install, built for daily use on residential and rural gates.

VIEW ULTIMA RANGE

TMT 800 GATE OPENER

TMT 800LS

Up to 800kg · 24VDC electric, powerpoint within 30m

A straightforward heavy-duty option when you've already got power near the gate. Built for rural properties and gates that open often, with the same DIY-friendly install as the rest of our range.

VIEW TMT 800LS

WHY BMGI

WE HELP YOU GET THE SETUP RIGHT THE FIRST TIME

Built for Here
Selected and tested for Australian heat, dust, rain and rural conditions — not just imported off a catalogue.
Real Phone Support
Not sure what to order, or stuck mid-install? Call and talk to someone who knows the products.
15+ Years Doing This
We've seen what fails and what lasts, our range reflects that, not the other way around.
COMMON QUESTIONS

SLIDING GATE MOTOR FAQS

  • What size sliding gate motor do I need?

    It depends on your gate's weight, length, and how often it's used. When in doubt, choose a higher-capacity motor than your gate technically needs.

  • Are solar sliding gate motors worth it?

    Yes — especially for rural or off-grid properties. A correctly sized solar motor is just as reliable as an electric one.

  • Can I install a sliding gate motor myself?

    Yes. Our kits are designed for DIY installation with clear instructions, and our team is on the phone if you need help.

  • How long do sliding gate motors last?

    With correct installation and basic maintenance, a quality motor can run reliably for many years in Australian conditions.
15+ Years
Industry experience
Phone Support
Real help, before & after
24hr Dispatch
Fast turnaround
Aussie Owned
Shipped Australia-wide

Read more: sliding gates

  • Hits: 154735

Written by Super User on . Posted in Uncategorised.

Driveway Gates

Driveway Gate Brisbane

DRIVEWAY GATES BRISBANE

Tips and information you need to know about Driveway Gates

What driveway gates are better suited.......a sliding gate or swinging gate?
Driveway Gates Brisbane

Why choose sliding driveway gates over swing drvieway gates

  • The driveway slopes up from the road and the gate is on the front boundary, therefore gates can't push outwards to open.
  • The driveway between the house and gate is limited and you wish to park a car close to the gate and still be able to open it.
  • You want a fully clad gate for privacy but your area is prone to strong winds.
  • The driveway opening is wider than 5 metres.

Why choose swinging driveway gates over sliding driveway gates

  • The driveway slopes down from the road and is long so a swing gate would be more cost-effective to install.
  • The driveway has no side room for a sliding gate to open.
  • The driveway is very uneven or has a large drain.
  • If you could have both a swing or a sliding gate, generally a swing gate is an easier option to install and you don't have to worry about keeping the track clear. You will however need to make sure your posts are concreted in well.

Driveway Gates Brisbane - Sliding Gates Information

How to install a sliding gate

Driveway Gates Brisbane

Sliding Gate Guides for driveway gates

Gate guides are required to keep the gate upright and guide the gate as it's moving, here are 2 options available.

Slide & guide block

Below images are examples of the slide and guide block setup.
This setup is required when you have a fall across your driveway and guide/rollers are not ideal.
Also if you have a gate with timber pailings attached to the frame face or a top rail design that does not allow the guide and roller setup.
Usually this setup will require a post on the inside of the gate (near the motor) where your guide will be mounted to.
If you require your gate to sit flush/inline with the existing fence line then this option will be best.

Slide guide and block for driveway sliding gate example of slide guide on a driveway sliding gate slide guide and nylon block Sliding gate using slide guide setup Sliding gate using slide guide setup

Guide bracket with rollers

Below images are examples of the guide bracket and rollers - this is your most ideal setup for your driveway gate.
Your guide bracket will usually be installed on your gate/fence post already installed.
If you have a fall over the driveway, this setup may still be possible, check if you can install longer rollers to suit.
Keep in mind your bracket will need to sit approx. 40 - 50mm above your gate, so make sure your post is a little higher than your gate finished height, otherwise you bracket will be sitting above your post. If you're not fussy about the bracket above your post height then this will be fine.
If you need your driveway gate to sit inline with your fence then look at using the slide guide and block setup.
example of guide and rollers on a sliding driveway gate guide and rollers setup for a sliding gate guide and rollers for driveway gate

Colour Bond Driveway Gates

Below images are an example of a solid colour bond driveway gate.
You may have an existing colour bond fence and want to finish it off with a matching driveway gate.
Why not have a frame made up and insert your colour bond panels inside the frame.

installing colour bond sheets into a driveway gate sliding driveway gate using colour bond sheets

Driveway not level

Below are some images showing how gates can be fabricated if your driveway is not level,
or if you have a sloping block and the gate needs to run with the land fall and fence line.

Double rake
driveway gate on a fall, sliding gate, driveway gate, front gate, driveway gates brisbane
Bottom rake only
swing gate on a gradient fall across the driveway, sliding gate, driveway gate, front gate, driveway gates brisbane
Double rake
driveway gate on a rake, sliding gate, driveway gate, front gate, driveway gates brisbane
Bottom rake only
driveway gate on a fall across the driveway made to suit, sliding gate, driveway gate, front gate, driveway gates brisbane

Gate Bridge - sliding gates

Below images are an example of gate bridges.
If you have a steep slope adjacent to your driveway and a concrete plinth is not feasible or desirable for your gate, then these bridges can be an excellent solution. The bridge is constructed by installing three or more legs at equal intervals along its length. These legs are then securely anchored into the ground using concrete. The length of the bridge will depend on the size of the gate and the width of the area that needs to be spanned.
sliding gate bridge, sliding gate, driveway gate, front gate, driveway gates brisbane sliding gate bridge to suit steep driveway fall, sliding gate, driveway gate, front gate, driveway gates brisbane aluminium sliding gate bridge, sliding gate, driveway gate, front gate, driveway gates brisbane sliding gate bridge to suit steep driveway fall, sliding gate, driveway gate, front gate, driveway gates brisbane

Swing Gate Information

Gate Posts

When considering automation on swing gates the ideal post size is around 100mm or 150mm square.
Post brackets generally supplied with gate automation are around 100mm x 100mm flat mounted.
When installing posts into the ground, rule of thumb is to go in half the height of your actual gate, eg 1800mm high gate, post depth 600mm.
We do not recommend mounting a post direct to concrete as the force of the gate automation placed on the post may pull it out of the ground.
swing driveway gates driveway swinging gates aluminium driveway gates auto driveway gates
Brick piers can be a tricky situation depending on where the gates are mounted and what type of automation you want.
At BMGi we only supply the Linear style automation. Depending on your setup, you may be required to look at an articulated arm.
When installing gates, it is best to install them to the inside face of your post or pier as shown above (not to the front or back) which will allow more of an angle which is required for an actuator arm.
Very Important fact: If installing gates onto a pier and they will be pulling into the property to open, make sure to mount them no further than 100mm - 150mm in from the rear face of the pier (all dependant on automation you select). For example, if your pier is 400mm x 400mm and you mount it in the middle at 200mm, then you run a high chance of your automation not working and you would then require an articulated system.
Gate on piers pier gates
Important: If using our E8500 kit we recommend a max of 150mm - if using our TMT 400LLS kit we recommend a max of 100mm

Installing double gates

When installing double swing gates make sure you allow for cable across the driveway for the second actuator arm. If this is not possible and you can't make a cut in the driveway or make use of an expansion joint then you can use steel or aluminium sliding gate track as shown in the photos below.
Driveway gates brisbane Driveway gate Gates
Frequently Asked Questions

  • What are driveway gates?

    Driveway gates are physical barriers installed at the entrance of a property to control access and enhance security. They can be designed in various styles, such as sliding or swinging, and can be operated manually or automatically.

  • What is the purpose of installing front gates?

    Front gates serve multiple purposes, including security, privacy, and aesthetic enhancement. They provide a physical barrier to unauthorized entry, restrict access to a property, and add a touch of elegance to the overall exterior appearance.

  • What are automatic driveway gates?

    Automatic driveway gates are gates that open and close automatically without the need for manual operation. They are equipped with motors, sensors, and control systems that allow for convenient access control, often through the use of remote controls, keypads, or other access devices.

  • What are the advantages of electric gates for driveways?

    Electric gates for driveways offer several advantages, including enhanced security, convenience, and improved property value. They provide a strong deterrent against intruders, eliminate the need for manual operation, and can be integrated with various access control systems for added convenience and flexibility.

  • What is a sliding driveway gate?

    A sliding driveway gate is a type of gate that operates by sliding horizontally along a track when opening or closing. These gates are commonly used in situations where space is limited or uneven ground conditions make it impractical to use swinging gates.

  • What is a swing driveway gate?

    A swing driveway gate is a type of gate that opens and closes by swinging inwards or outwards, similar to a door. These gates are often used when there is sufficient space available and provide a more traditional and elegant look to the property entrance.

  • Can driveway gates be customized to match the property's aesthetics?

    Yes, driveway gates can be customized to match the aesthetics of the property. They can be crafted from various materials, such as wrought iron, wood, aluminum, or steel, and can be designed with decorative elements, patterns, or personalized motifs to complement the overall style of the property.

  • Are driveway gates weather-resistant?

    Yes, driveway gates are typically designed to withstand various weather conditions. The materials used, such as aluminum or galvanized steel, are often treated or coated to resist corrosion and are durable enough to endure outdoor exposure. However, regular maintenance and upkeep may be required to ensure their longevity.

  • Are driveway gates difficult to install?

    The complexity of installing driveway gates can vary depending on the specific type and features of the gate, as well as the existing infrastructure. While some simpler gates can be installed by confident DIY enthusiasts, it is often recommended to hire professional gate installers to ensure proper installation, alignment, and integration with access control systems.

  • Can driveway gates be retrofitted to an existing property?

    In many cases, driveway gates can be retrofitted to an existing property. However, this depends on factors such as available space, the condition of the driveway, and any necessary modifications that may need to be made. Consulting with a professional gate installer is recommended to determine the feasibility of retrofitting a driveway gate to an existing property.

Read more: Driveway Gates

  • Hits: 154186

More Articles ...